What to do if my HTC Diamond Cell Phone main unit does not respond to the power button?
- EEmily BarberAug 18, 2025
If your HTC Cell Phone's main unit isn't responding to the power button, try these steps: First, connect the AC adapter to recharge the battery, waiting a few minutes. Check if the battery is correctly installed. Inspect the power button for damage. If possible, replace the battery pack. As a more advanced step, attempt to start boot-loader mode and re-flash the ROM if boot loader mode is enabled. Ensure all connectors, including the LCD FPC to the Main Board, are properly connected. If necessary, replace the Main Board. Finally, once a defective part is identified, double-check if the issue can be replicated on another unit.