SMARTPHONE GUIDE
P A GE 18
The materials contained herein are the proprietary information of Impact Resource Group.
No dissemination of these materials is permitted without expressed written consent.
Impact Resource Group © 02072012
Preparing to Enter Product Assemblies
Once you have a work order entry selected, click the blue (1)
View button that is displayed in the same area as where the
work order is listed. This is done to access the next set of screens
where you will begin entering the bikes you have assembled
followed by any repairs you have completed.
Adding Product Assemblies to Your Report
The Assembly List screen, shown right, is where you enter the
products you have assembled. The first step to do this is to
click the (2) “+” symbol. This will load the Add Assembly
screen, shown below right.
From the Add Assembly screen press the (3) Product Code
drop down list and then select the item you assembled. Next,
click the (4) Qty drop down list and select the number of
items you assembled of the product chosen. To add this entry
to your report, click the (5) Save button.
You will be returned to the Assembly List where the products
you entered will be (6) listed with the quantity, SKU and product
type.
2
3
4
5
6
1
To Next Page
Loading...
