HTC U11+ User Manual

IMPORTANT:
Use a standard nano SIM only.
Don’t cut a micro or regular SIM card and insert it into the
nano SIM slot. It’s thicker than the standard nano SIM card and
may get stuck in the slot.
Don’t disassemble any part of the phone.
Don’t try to open the phone or remove the battery by force. This
may damage the phone or its electronics and will invalidate the
warranty.
Don’t throw the tray away.
You need it to insert your nano SIM and microSD ™ cards.
1. With the phone facing up,
insert the tip of the tray
eject tool that came in
the box (or a small bent
paperclip) into the tray
eject hole.
Push the tip all the way
into the hole until the card
tray ejects and then gently
pull the tray out.
2. With the gold contacts
facing down, place your
nano SIM cards into the
SIM 1 and SIM 2 holders
of the tray. Make sure to
align the cut-off corners
to the notches on the
holders.
Note: By default, SIM 1
will connect to the 4G
LTE/3G network, and SIM
2 will connect to 3G/2G.
To find out how to change
network connection
settings for your nano SIM
cards, see the user guide.
___ Inserting nano SIM and microSD cards
HTC U11+
gold contacts
cut-o corner
nano SIM
2
1
Note:
Do not insert
the tray eject
tool into the
microphone
hole.

HTC U11+ Specifications

General

Processor	Qualcomm Snapdragon 835
Battery	3930 mAh, non-removable
Dimensions	158.5 x 74.9 x 8.5 mm
Weight	188 g
Colors	Ceramic Black, Amazing Silver, Translucent Black
SIM	Single SIM (Nano-SIM) or Hybrid Dual SIM (Nano-SIM, dual stand-by)
Network	GSM / HSPA / LTE
Sensors	Fingerprint (rear-mounted), accelerometer, gyro, proximity, compass
Announced	2017, November
Display	6.0 inches, Super LCD6, 1440 x 2880 pixels
RAM	4GB/6GB
Storage	64GB/128GB, expandable via microSD
Rear Camera	12 MP, f/1.7
Front Camera	8 MP, f/2.0
Operating System	Android 9.0 (Pie)
Water Resistance	IP68 dust/water resistant
Connectivity	Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, NFC, USB Type-C
Build	Glass front (Gorilla Glass 5), glass back, aluminum frame