3. With the microSD card’s
gold contacts facing down
and narrow side facing in,
place the card into the SD
holder of the tray.
4. When reinserting the tray,
make sure it is facing up
so that the cards don’t fall
out. Hold the tray with the
microSD card between
your fingers, and then
steadily slide the tray all
the way into the slot.
4
3
___ Using the protective case
Use the case that’s provided in the box to help protect your
phone from accidental bumps and scratches.
Place the phone into the
protective case, top side first.
Then press the four corners
until the case clicks into place.
To remove the case, take
it o from the bottom
corner.
microSD
gold
contacts
To Next Page
Loading...
