If you have long hair, position the back head support above the base of your skull.
3. Tighten the velcro straps on top and turn the Adjustment dial to tighten the back head
support. The fit should be snugged.
Always use the Adjustment dial to tighten the back head support. Do not push it in.
Plugging in your headphones
Listen using the built-in speakers or for a more immersive experience, plug in your own pair of
headphones or earphones.
§ Plug in your headphones to the 3.5mm headset jack at the bottom of the headset.
§ Press the Volume buttons on the bottom left side of the headset or the right side of the
controller to adjust the volume.
14 Headset
To Next Page
Loading...
