HTC Corporation 07/17/2017
33
HTC Confidential and Proprietary
Unity integration
This section provides an example for content developers to enable Vive Tracker in VR content
by using Unity game engine.
First, you need to make Vive Tracker detectable in SteamVR. Assume that you have two Vive
controllers already, and you have plugged in the dongle into the dongle cradle to the
computer’s USB port. Right-click on one of the existing controller’s icon and click “Pair
Controller” in the pop-up menu (shown in figure below). Press the Power button on Vive
Tracker for 2 seconds, and then release it to enter the paring mode.
Figure: Pair Vive Tracker
After paring is successful between the Vive Tracker and the dongle, you will see that the Vive
Tracker is detected in the SteamVR UI.
Figure: Vive Tracker is added in SteamVR
To Next Page
Loading...
