HTC Corporation 07/17/2017
43
HTC Confidential and Proprietary
5 How can I update Vive Tracker? 1. From your computer, open the SteamVR app.
2. Using the supplied USB cable, connect the Vive
Tracker to one of your computer’s USB ports. The
firmware update will start automatically once
tracker is detected by SteamVR.
Warning: Do not unplug the micro-USB cable any
time before the firmware update is complete.
Doing so could result in a firmware error.
3. When the update is complete, click Done.
6 Why does Vive Tracker
automatically turn off?
When Vive Tracker turns off, some of the possible
reasons might be:
The battery is drained
Pairing has timed out after being idle for more
than 30 seconds
There was no user movement for 5 minutes
7 Can I use more than one Vive
Tracker?
Multiple Vive Tracker hardware can be used, but
limitations apply.
8 Why can't I see Vive Tracker on
SteamVR?
Check that your SteamVR app is the latest version.
9 How do I reset Vive Tracker? To reset Vive Tracker, connect it to your computer
using the supplied USB cable, and then press and
hold the Power button for 10 seconds.
10 How many Tracker can be
adapted?
The maximum number of tracking objects can be
adopted is 11 pcs of Vive Tracker plus 2 pcs of Vive
controller.
To Next Page
Loading...
