Huawei AP Series User Manual

No.
Item
Quantity
Unit
1
AP device
1
PCS
2
Installation suite
1
PCS
3
Network port connector
1
PCS
4
M4x12 hexagon socket head cap screw
4
PCS
5
Expansion bolt
2
PCS
6
Hose clamp
2
PCS
7
Fiber wrench
1
PCS
8
OT terminals
2
PCS
9
Quick Start
1
PCS
10
Installing the AP
1. Installation Flowchart
Figure 1 Flowchart for installing an AP
2. Checking Before Installation
Unpack the package. Ensure that all the items listed in the packing list are included in the carton. If
any item is missing, contact the supplier.
Table 6 Packing list
NOTE
 Before unpacking the carton, ensure that the packing carton is intact and that the carton is
not severely damaged or soaked. Stop unpacking if the packing carton is rusted or socked.
Then, investigate causes and give a feedback to the vendor.
 Optical fiber tubes are only contained in the AP6610DN-AGN packing carton.

Huawei AP Series Specifications

General

Category	Wireless Access Point
Model	AP Series
Wireless Standards	IEEE 802.11a/b/g/n/ac/ax
Frequency Bands	2.4 GHz, 5 GHz
MIMO Technology	MU-MIMO
Security Features	WPA3, WPA2, WPA, WEP
Management	Web-based management
PoE Support	802.3af/at
Ethernet Ports	1 or more Gigabit Ethernet ports
Antenna Type	Internal or External antennas (depending on the model)
Humidity	5% to 95% non-condensing
Dimensions	Varies depending on the model
Weight	Varies by model
Mounting	Wall, ceiling, pole