18
Power-on
Table 10 Indicator status of the AP6310SN-GN
The device is being started.
The system is working properly.
The system fails to load the DRAM
or system software.
The system is working properly.
However, the Ethernet is not
connected. Radios are disabled
and no user is connected to the AP.
The system is working properly, but
the Ethernet is not connected. The
AP has wireless users connected
and is transmitting data. The
indicator blinks more quickly when
more packets are being transmitted.
The system is working properly, the
Ethernet is connected, and radios
are disabled. The indicator blinks
more quickly when more data is
being transmitted.
The system is working properly,
and the Ethernet is connected. The
AP has wireless users connected
and is transmitting data. The
indicator blinks more quickly when
more packets are being transmitted.