l Supports four SFP optical module types: short-distance multi-mode (1310 nm), mid-
distance single-mode (1310 nm), long-distance single-mode (1310 nm), and ultra-long-
distance single-mode (1550 nm).
l Automatically starts and loads configurations after being powered on, provides the system
management function using a GE inband channel, and uses the UART serial interface as
the escape channel for subcard.
l Uses the 12 V power provided by the backplane, be powered on and off by the main control
board, and monitors voltage and current.
l Be hot swappable.
Applications
1CPOS-155M can be installed in a SIC slot of AR2220, AR2240 and AR3260.
Panel and Interfaces
Figure 5-19 shows the appearance of the 1CPOS-155M.
Figure 5-19 Appearance of the 1CPOS-155M
Buttons and Indicators on the Panel
Table 5-55 describes the buttons and indicators on the 1CPOS-155M panel.
Table 5-55 Buttons and indicators on the 1CPOS-155M panel
Number in
Figure 5-19
Indicator Color Description
1 STAT Green If the indicator blinks once 2s (0.5
Hz), the system is running properly.
If the indicator blinks once 0.25s (4
Hz), the system is powering on or
restarting.
Red If the indicator is red, a fault that
affects services occurs and cannot be
rectified automatically. The fault
needs to be rectified manually.
Huawei AR1200&2200&3200 Series Enterprise Routers
Hardware Description 5 Cards
Issue 03 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
94
To Next Page
Loading...
