Table 5-68 Buttons and indicators on the 4GEW-S panel
Number
in
Figure
5-22
Indicator Color Description
1 STAT Green If the indicator is steady on, the router
has been powered on, but the system
software is not running.
If the indicator blinks once every 2s (0.5
Hz), the system is running properly.
If the indicator blinks once every 0.25s
(4 Hz), the system is loading software
after power-on or is restarting.
Red
If the indicator is steady on, a fault that
affects services has occurred and
cannot be rectified automatically. The
fault needs to be rectified manually.
Off If the indicator is off, the software is not
running or is being reset.
2 and 3 GE interface
indicators:
l The LINK
indicator is in
green.
l The ACT
indicator is in
yellow.
Green
If the indicator is steady on, a link has
been established.
If the indicator is off, no link is
established.
Yellow If the indicator is blinking, the interface
is transmitting or receiving data.
If the indicator is off, no data is being
transmitted or received.
Interfaces
Table 5-69 describes the types and functions of interfaces on the 4GEW-S interface card.
Table 5-69 Types and functions of interfaces on the 4GEW-S interface card
Lette
r in
Figur
e
5-22
Name Qu
ant
ity
Description Cable Type
a 1000BA
SE-X
optical
interface
4 The 4GEW-S interface card provides four GE
optical interfaces to transmit and receive GE
service traffic.
6.6 Optical
Fiber
Huawei AR1200&2200&3200 Series Enterprise Routers
Hardware Description 5 Cards
Issue 03 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
105
To Next Page
Loading...
