Table 5-32 Buttons and indicators on the 1E1T1-M/2E1T1-M panel
Number in
Figure 5-12,
Figure 5-13,
Figure 5-14
Indicator Color Description
1 STAT Green If the indicator blinks once 2s (0.5
Hz), the system is running properly.
If the indicator blinks once 0.25s (4
Hz), the system is powering on or
restarting.
Red If the indicator is red, a fault that
affects services occurs and cannot be
rectified automatically. The fault
needs to be rectified manually.
Off If the indicator is off, the software is
not running or is being reset.
2 LINK/ACT Green If the indicator is steady on, a link
has been established.
Yellow (The
indicator is in
green and blinks
red.)
If the indicator is in green and blinks
red, data is being transmitted or
received.
Off If the indicator is off, there is no
connection.
Interfaces
Table 5-33 describes the types and functions of interfaces on the 1E1T1-M/2E1T1-M.
Table 5-33 Types and functions of interfaces on the 1E1T1-M/2E1T1-M
Letter in
Figure
5-12,
Figure
5-13,
Figure 5-14
Nam
e
Quantity Description Cable Type
a DB9 1E1T1-M: 1
2E1T1-M: 2
75-ohm or 120-
ohm E1 cable or
100-ohm T1
cable
6.7 E1/T1 Trunk Cables
Huawei AR1200&2200&3200 Series Enterprise Routers
Hardware Description 5 Cards
Issue 03 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
79
To Next Page
Loading...
