1.2.0.1/32 ISIS-L1 15 10 D 10.1.1.2 Ethernet1/0/0
1.3.0.0/24 ISIS-L1 15 20 D 10.1.1.2 Ethernet1/0/0
10.1.1.0/24 Direct 0 0 D 10.1.1.1 Ethernet1/0/0
10.1.1.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
20.1.1.0/24 ISIS-L1 15 20 D 10.1.1.2 Ethernet1/0/0
20.1.2.0/24 ISIS-L1 15 20 D 10.1.1.2 Ethernet1/0/0
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
The command output shows that the host routes to LSRB and LSRC have been aggregated.
Step 4 Configure global and interface-based MPLS and MPLS LDP on each node so that the network
can forward MPLS traffic, and view the setup of the LSP.
# Configure LSRA.
[LSRA] mpls lsr-id 1.1.0.1
[LSRA] mpls
[LSRA-mpls] quit
[LSRA] mpls ldp
[LSRA-mpls-ldp] quit
[LSRA] interface ethernet 1/0/0
[LSRA-Ethernet1/0/0] mpls
[LSRA-Ethernet1/0/0] mpls ldp
[LSRA-Ethernet1/0/0] quit
# Configure the LSRD.
[LSRD] mpls lsr-id 1.2.0.1
[LSRD] mpls
[LSRD-mpls] quit
[LSRD] mpls ldp
[LSRD-mpls-ldp] quit
[LSRD] interface ethernet 1/0/0
[LSRD-Ethernet1/0/0] mpls
[LSRD-Ethernet1/0/0] mpls ldp
[LSRD-Ethernet1/0/0] quit
[LSRD] interface ethernet 1/0/1
[LSRD-Ethernet1/0/1] mpls
[LSRD-Ethernet1/0/1] mpls ldp
[LSRD-Ethernet1/0/1] quit
[LSRD] interface ethernet 2/0/0
[LSRD-Ethernet2/0/0] mpls
[LSRD-Ethernet2/0/0] mpls ldp
[LSRD-Ethernet2/0/0] quit
# Configure LSRB.
[LSRB] mpls lsr-id 1.3.0.1
[LSRB] mpls
[LSRB-mpls] quit
[LSRB] mpls ldp
[LSRB-mpls-ldp] quit
[LSRB] interface ethernet 1/0/0
[LSRB-Ethernet1/0/0] mpls
[LSRB-Ethernet1/0/0] mpls ldp
[LSRB-Ethernet1/0/0] quit
# Configure LSRC.
[LSRC] mpls lsr-id 1.3.0.2
[LSRC] mpls
[LSRC-mpls] quit
[LSRC] mpls ldp
[LSRC-mpls-ldp] quit
[LSRC] interface ethernet 1/0/0
[LSRC-Ethernet1/0/0] mpls
[LSRC-Ethernet1/0/0] mpls ldp
[LSRC-Ethernet1/0/0] quit
Huawei AR1200 Series Enterprise Routers
Configuration Guide - MPLS 2 MPLS LDP Configuration
Issue 01 (2011-12-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
108
To Next Page
Loading...
