1 Static LSPs Configuration
About This Chapter
You can set up a static LSP by manually allocating labels to LSRs. The static LSP applies stable,
small-scale networks.
1.1 Overview of Static LSPs
The static LSP cannot be set up using a label distribution protocol but can be set up by an
administrator. The static LSP applies to a stable and small-scaled network with the simple
topology.
1.2 Static LSPs Features Supported by the AR1200
1.3 Configuring Static LSPs
A static LSP can be set up only after each LSR is manually configured.
1.4 Maintaining Static LSPs
The static LSP maintenance consists of deleting MPLS statistics, detecting connectivity or
reachability of an LSP, and configuring the trap function on an LDP LSP.
1.5 Configuration Examples
The following sections provide several examples of the static LSP configurations. Familiarize
yourself with the configuration procedures against the networking diagram. Each configuration
example consists of the networking requirements, configuration precautions, configuration
roadmap, configuration procedures, and configuration files.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - MPLS 1 Static LSPs Configuration
Issue 01 (2011-12-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1
To Next Page
Loading...
