EasyManua.ls Logo

Huawei AR1200 Series - Page 93

Huawei AR1200 Series
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
0.0.0.0/0 Static 60 0 RD 10.1.1.2
GigabitEthernet1/0/0
1.1.1.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
10.1.1.0/24 Direct 0 0 D 10.1.1.1
GigabitEthernet1/0/0
10.1.1.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
The configured default route exists on LSRA.
# Run the display ip routing-table command on LSRB to view routing information.
[LSRB] display ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 12 Routes : 12
Destination/Mask Proto Pre Cost Flags NextHop Interface
1.1.1.1/24 Static 60 0 RD 10.1.1.1
GigabitEthernet1/0/0
2.2.2.2/32 Direct 0 0 D 127.0.0.1 InLoopBack0
3.3.3.3/32 ISIS-L1 15 10 D 10.1.2.2
GigabitEthernet2/0/0
4.4.4.4/32 ISIS-L1 15 74 D 10.1.2.2
GigabitEthernet2/0/0
10.1.1.0/24 Direct 0 0 D 10.1.1.2
GigabitEthernet1/0/0
10.1.1.2/32 Direct 0 0 D 127.0.0.1 InLoopBack0
10.1.2.0/24 Direct 0 0 D 10.1.2.1
GigabitEthernet2/0/0
10.1.2.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
You can view that the configured default route to LSRA exists on LSRB.
Step 3 Enable global and interface-based MPLS and MPLS LDP on each node.
# Configure LSRA.
<LSRA> system-view
[LSRA] mpls lsr-id 1.1.1.1
[LSRA] mpls
[LSRA-mpls] quit
[LSRA] mpls ldp
[LSRA-mpls-ldp] quit
[LSRA] interface gigabitethernet 1/0/0
[LSRA-GigabitEthernet1/0/0] mpls
[LSRA-GigabitEthernet1/0/0] mpls ldp
[LSRA-GigabitEthernet1/0/0] quit
The configurations for LSRB, LSRC, and LSRD are the same as the those for LSRA, and the
configuration details are not provided here.
Step 4 Configure the DoD label distribution mode.
# Configure LSRA.
<LSRA> system-view
[LSRA] interface gigabitethernet 1/0/0
[LSRA-GigabitEthernet1/0/0] mpls ldp advertisement dod
[LSRA-GigabitEthernet1/0/0] quit
# Configure LSRB.
<LSRB> system-view
Huawei AR1200 Series Enterprise Routers
Configuration Guide - MPLS 2 MPLS LDP Configuration
Issue 01 (2011-12-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
86

Table of Contents

Other manuals for Huawei AR1200 Series

Related product manuals