Huawei Ascend Mate - Connecting to a Wi-Fi network using the WPS; Wi-Fi Direct

Internet connection
55
4. Choose the Wi-Fi network you wish to connect to and touch
Connect .
For an encrypted Wi-Fi network, enter the password when prompted.
If Wi-Fi and mobile data are both enabled, your phone connects to the Wi-
Fi network preferentially. When Wi-Fi becomes unavailable, your phone
automatically switches to the mobile data connection.
Connecting to a Wi-Fi network using the WPS
The Wi-Fi protected setup (WPS) lets you quickly connect to a Wi-Fi network. A safe
connection is set up by pressing the WPS button or entering the PIN, instead of complex
settings on the management software of Wi-Fi hotspots, such as wireless routers.
To use the WPS function and set up a Wi-Fi connection between your phone
and a Wi-Fi hotspot, make sure that the Wi-Fi hotspot also supports the
WPS.
Using the WPS button
1. On the home screen, touch then the All tab.
2. Under WIRELESS & NETWORKS , touch the Wi-Fi switch to turn on Wi-Fi.
3. On the Wi-Fi network list, touch .
4. On the Wi-Fi hotspot device, press the WPS button.
Using the WPS PIN
1. On the home screen, touch then the All tab.
2. Under
WIRELESS & NETWORKS , touch the Wi-Fi switch to turn on Wi-Fi.
3. On the Wi-Fi network list, touch .
4. Touch
Input WPS PIN .
Your phone generates a PIN.
5. On the Wi-Fi hotspot device, enter the PIN.
Wi-Fi Direct
Wi-Fi Direct lets you easily connect two devices and transmit or share data between them.
Connecting two devices using Wi-Fi Direct
1. On the home screen, touch then the All tab.