Need help?Do you have a question about the Huawei B200 Series and is the answer not in the manual?
General| Category | Gateway |
|---|---|
| Model | B200 Series |
| Interface | Ethernet |
| Protocols Supported | TCP/IP, UDP, HTTP |
| Power Supply | 5V DC |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to +60°C |
| Humidity | 5% to 95% (non-condensing) |
Comprehensive safety guidelines covering device usage, environment, handling, maintenance, and legal compliance for safe operation.
Details the physical appearance of the device, its ports, and the status indicated by various LED lights.
Specifies the minimum hardware and software requirements for a PC to effectively use the wireless gateway.
Step-by-step guide for installing the device, including SIM card insertion and power connection.
Instructions for placing calls, positioning the device, and accessing the internet via dial-up.
Guide on how to access the device's web-based management interface.
Detailed steps for establishing an internet connection through the device.
Procedure for resetting the device to its original factory settings.
Overview of the management page's structure, operation functions, and device status indicators.
How to access and view the current parameter configurations and network connection status.
Using the wizard to configure basic device parameters and PPP profile settings.
Details on configuring PPP dial-up modes and optional WLAN network settings.
Configuration options for WLAN, including SSID broadcast and encryption methods like WPA/WEP.
Finalizing the quick setup process by accepting, changing, or canceling configurations.
Guide to connecting your PC to the device via a wireless network, including requirements.
Step-by-step instructions for setting up a wireless connection between your PC and the gateway.
Recommended PC settings for network connection, including IP address and proxy settings.
Procedure to disable proxy server settings in the internet browser for LAN connection.
Introduction to advanced settings and managing system parameters like password and device upgrades.
Instructions for upgrading device firmware and changing the login password.
Managing SIM card settings, PIN code operations, and viewing version information.
Configuring mobile network preferences like mode and band, and managing SIM PINs.
Configuring dial-up connections, PPP settings, network search modes, and profile management.
Configuring DHCP server settings for automatic IP address assignment within the LAN.
CLIP settings and enabling/disabling the WLAN feature with advanced DHCP configurations.
Configuring basic WLAN settings, SSID, country, channel, and 802.11 network modes.
Advanced WLAN settings including encryption modes, authentication types, and WLAN bridge configuration.
Configuring WLAN bridge functionality and setting up MAC address filtering for network security.
Enabling the firewall and configuring MAC address filtering for LAN security.
Configuring the device to block specific IP addresses from accessing the local network.
Setting up virtual servers for external access to services provided by the LAN.
Configuring DMZ, UPnP, and remote management for enhanced network control and access.
Finalizing remote management settings, specifying allowed IP addresses for access.
Troubleshooting steps for when a PC on the LAN cannot access the internet.
Steps to resolve issues where a PC cannot access the WLAN.
Resolving issues with unsuccessful bridging and low downloading rates.
Registry adjustments to improve download speed when signal strength is normal.
Definitions of common technical abbreviations used in the document.
To Next Page
