Need help?Do you have a question about the Huawei B535-232a and is the answer not in the manual?
General| Model | B535-232a |
|---|---|
| Category | Gateway |
| Wi-Fi Standards | 802.11a/b/g/n/ac |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Ethernet Ports | 4 |
| SIM Support | Yes |
| LTE Category | LTE CAT7 |
| Download Speed | 300 Mbps |
| Upload Speed | 100 Mbps |
| Ethernet Ports Type | Gigabit Ethernet |
| SIM Card Slot | Nano SIM |
| Battery | No |
| Dimensions | 219 mm x 138 mm x 25.6 mm |
| Weight | 325 g |
| External Antenna Ports | 2 |
| Wi-Fi Speed | 1167 Mbps |
Provides an overview of the document's content, including features, functions, and references.
Details technical specifications of the B535-232a main unit, including WAN, LAN, Wi-Fi, LTE, UMTS, ports, and antennas.
Covers specifications for built-in LTE/UMTS and Wi-Fi antennas, including frequency, impedance, efficiency, gain, and polarization.
Details specifications for built-in LTE antennas, including frequency bands, input impedance, standing wave ratio, and main antenna efficiency.
Provides specifications for built-in Wi-Fi antennas, covering 2.4 GHz and 5.0 GHz bands, including frequency, impedance, efficiency, gain, and polarization.
Details software specifications, including LTE features, mobile network settings, gateway, and various network protocols.
Explains how the B535-232a accesses the internet via mobile and Ethernet networks for high-speed internet and LAN connectivity.
Covers the B535-232a's support for SMS functionalities, including writing, sending, receiving, and group sending.
Highlights the B535-232a's security features, including a firewall and PIN protection, to safeguard devices and networks.
Explains the firewall function which enables or disables network protection against hacker attacks and controls internet access.
Details the Media Access Control (MAC) address configuration for restricting network access to enhance security.
Lists the supported user authentication protocols for Wi-Fi, including no encryption and WPA/WPA2-PSK.
Describes the VPN client capabilities, including L2TP and PPTP tunneling protocols for secure network connections.
Explains VPN tunneling, encapsulating packets for secure transmission between VPN clients and servers.
Covers L2TP/PPTP VPN pass-through for LAN devices, enabling them to create VPN tunnels to a VPN server.
Details how the LTE CPE passes the WAN IP address to PCs or routers for direct internet access.
Explains dual-stack functionality supporting IPv4/IPv6 and the IPv6-only transition solution (CLAT) for IPv4 devices.
Covers the support for two APNs, isolating data and management services, and an independent APN for CPE internal/TR-069.
Explains the 5GHz Wi-Fi band priority feature for increased speeds, with options for dual SSIDs based on preference.
Details HiLink device connectivity (up to 5 devices) via the H button for expanded networks and quick connections.
Describes Web UI and HUAWEI AI Life App for device and network configuration.
Details operator maintenance via TR-069 for remote CPE software updates and parameter configuration.
Explains the HOTA (Huawei Firmware Over the Air) feature for remotely updating device firmware via the HOTA server.
Illustrates the system structure, detailing modules like Internet access, LTE, LAN, AP, and DHCP/DNS functions.
Outlines constraints for the B535-232a, including limitations with IP Pass-Through, VPN client, and maximum Wi-Fi connected devices.
Lists standards and communication protocols used by the product, including RFCs for physical layer, IP, ICMP, TCP, UDP, DHCP, and NAT.
Details specific standards and protocols like RFC894 for physical layer, RFC826 for ARP, and various RFCs for IP, ICMP, TCP, UDP, DHCP, and NAT.
States that the device supports 3GPP Release 11 for the Wireless Uu Interface.
To Next Page