Huawei B68A User Manual

2
Network mode
indicator

Fast red blinking: no SIM/USIM card is found, the
PIN is not verified, or the SIM/USIM card is not
working properly.

Steady yellow: registered with a 3G/2G network.

Steady green: connected to the Internet.

Off: no signal.
Wi-Fi/WPS
indicator

Steady on: Wi-Fi turned on or data transfer in
progress.

Blinking: a WPS connection is being set up.

Off: Wi-Fi turned off.
/ / /
LAN indicator

Steady on: LAN port is connected to a client.

Blinking: data is being transmitted through LAN
port.

Off: no client is connected to LAN port.
SIM/USIM card
slot
Install a SIM/USIM card to access to the Internet via
a 3G/2G data connection.
Reset button
Restoring the default settings of the B68A will erase
all previous settings.
When the B68A is powered on, use a sharply
pointed object to press and hold for about 3 seconds
until all indicators are blinking to restore the B68A to
its factory settings. After the factory defaults are
restored, the B68A will restart automatically.

Huawei B68A Specifications

General

Brand	Huawei
Model	B68A
Category	Gateway
Language	English