12
4. If the encryption parameter is set for the device, the Wireless Network
Connection dialog box is displayed and requires the network key and
confirmation. The value you entered must be the same as the WPA Pre-Shared
Key or Network Key of the device.
5. Wait for a while after you enter the correct network key. The wireless connection
icon displays in the status area in the lower right corner of the screen. Then,
your PC can automatically connect to the device.
Configuring the PC Network
The recommended configurations of the PC are as follows:
y Obtain an IP address automatically.
y Deselect Use a proxy server for your LAN.
To Next Page
Loading...
