Huawei DG8245V - LAN, VoIP, and USB Indicators; Ports and Buttons; Device Ports; Device Buttons

2
Indicator
Status
Description
LAN1–
LAN4
Steady green
The LAN port is connected to an Ethernet device (such as a
computer) with a network cable, but no data is being transmitted.
Green blinking
The LAN port is connected to an Ethernet device with a network
cable, and data is being transmitted.
Off
The LAN port is not connected to any Ethernet device.
VoIP
Steady green
The DSL home gateway is registered with an SIP server, but no
data is being transmitted.
Green blinking

The DSL home gateway is being registered with an SIP server.
(Blinks twice per second.)
 The DSL home gateway is registered with an SIP server, and
data is being transmitted. (Blinks 4 times per second.)
Off
No VoIP service, or VoIP WAN configuration exists.
USB
Steady green
The DSL home gateway is connected to a USB device, but no data
is being transmitted.
Blinking green
The DSL home gateway is connected to a USB device, and data is
being transmitted.
Off
The DSL home gateway is not connected to any USB device.
3 Ports and Buttons
No.
Item
Description
1
DSL
Connects to a DSL filter or telephone socket.
2 WAN
Connects to an Ethernet device that provides Internet access, such
as a modem or switch.
3 LAN4–LAN1
Connects to Ethernet devices, such as computers, set-top boxes
(STBs), and switches.
4
Phone2–Phone1
Connects to a telephone.
5
USB
Connects to a USB device.
6 Reset
Restores the DSL home gateway to its default settings or resets the
DSL home gateway.
 To restore the DSL home gateway to its default settings, press and
hold the Reset button for more than 6s after the DSL home
gateway is powered on, and then release the button. After the DSL
home gateway is restored to its default settings, all customized
user data will be lost. Use this function only when necessary.
 To reset the DSL home gateway, press and hold the Reset button
for not more than 6s after the DSL home gateway is powered on.
7
Power
Connects to a power adapter.