22
• microSD card
» Remove the rubber cap from the microSD card slot. Then insert the microSD card
into the slot.
» After inserting the microSD card completely, attach the rubber cap.
• Note:
• The microSD card is an optional accessory. If the microSD card is not provided in the package,
you can buy one yourself.
• To remove the microSD card, open the rubber cap and press the microSD card gently.
• When the microSD card pops up automatically, take it out.
• Do not remove the card when it is being used. Otherwise, the card and the E5 may be damaged,
and the data stored on the card may be corrupted.
• Restoring the Factory Defaults
• If you forget the changes of some parameter settings, you can restore them to factory defaults and
reconfigure the parameters of the E5.
• Press and hold WiFi/WPS and Connect at the same time until all the indicators are off.
• Then you restore the factory defaults.
• Note: After this operation, all personal configuration settings are deleted and all factory settings
will be restored.
User manual
To Next Page
Loading...
Need help?
General
