2
Indicator Status Description
On The indicators indicate the signal strength of the
WiMAX network.
When all the indicators are on, it indicates that the
signal strength is at the highest level.
Blink The CPE is being upgraded when they blink
sequentially.
The software is damaged when they blink randomly.
WiMAX
Off There is no WiMAX network signal.
On The TEL interface is being used.
Blink The TEL interface has an incoming call.
TEL1-TEL2
Off The telephone connected to the TEL port hangs up or
the TEL interface is disabled.
On The CPE is powered on. POWER
Off The CPE is powered off.
Notes:
WiMAX: Worldwide Interoperability for Microwave Access
CPE: Customer Premises Equipment
Rear Panel
LAN4
POWER
LAN1
LAN2
LAN1
LAN2
LAN3
LAN3
LAN4
TEL1
TEL2
To Next Page
Loading...
