3
Interface/Indicator Description
POWER The interface is used to connect to the output interface of the
power adapter.
LAN The interfaces are used to connect the CPE to the computer or
the switch.
The indicators are used to indicate the status of the devices
connected to the corresponding interfaces.
TEL The interfaces are used to connect a telephone line.
Side Panel
The preceding figure shows the appearance of the side panel that is rotated 90 degrees
counterclockwise.
RESET
Button Description
RESET Press and hold the button for one to eight seconds to restart the CPE.
Press and hold the button for over eight seconds to restore the default
settings of the CPE.
Once you restore the default settings, all the customized data will
be lost. Use this function with caution.
To Next Page
Loading...
