Huawei EchoLife BM635

EchoLife BM635
User Guide
3 Configuring Basic Functions
Issue 01 (2008-06-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
3-9
3.3 Configuring RIP
Route is used to configure routes and forward packets. Routing Information Protocol
(RIP) is used to automatically set parameters of a route. RIP is applied to set up a
network with a complicated topology structure. The maintenance of a RIP network is
simple.
Step 1
In the navigation tree, choose
Advanced > RIP
, and then click the
RIP
tab.
Step 2
Select an interface from
Interface
.
Step 3
Select an operation status from
Operation
.
Step 4
Select a version from
Version
.
Step 5
Click
Apply
.
----End
3.4 Configuring
QoS
The quality of service (QoS) varies with the requirements of network applications.
Step 1
In the navigation tree, choose
Advanced > QoS
, and then click the
QoS
tab.
Step 2
The
Interface Name
list all interface names, enter the Differentiated Services Code
Point (DSCP) in the
DSCP
text box.
Step 3
Select the priority of interface from the
Priority
.
Note:
z The priority is from one to five, one level is the highest priority.
z The priority of local cannot be modified.
Step 4
Click
Apply
.
----End