Huawei EchoLife BM635

EchoLife BM635
User Guide
4 Configuring Advanced Functions
Issue 01 (2008-06-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
4-3
4.1.2 Configuring WiMAX Security Parameters
By configuring the security authentication mode and importing a certificate, you can
finish the settings of the WiMAX security parameters.
Configuring the Security Authentication Mode
In the navigation tree, choose WiMAX > Security, and then click the Security tab.
The parameter description is as follows.
Parameter Description
PKM
It indicates whether authentication is required during network
access. There are two authentication modes:
z
NO PKM
z
PKMv2_EAP
Authentication
It indicates the authentication type. There are two authentication
types:
z
TLS: It indicates device authentication.
z
TTLS: It indicates user authentication.
NAI
It indicates the NAI. The default value is
1E:CA:FE:00:00:00@huawei.com
.
User ID It indicates the user ID provided by the ISP.
User Password It indicates the user password provided by the ISP.
Note:
EAP = Extensible Authentication Protocol; NAI = network access identifier
PKM = Privacy key management; TLS = Transport layer security protocol
TTLS = Tunneled transport layer security protocol
Importing a Certificate
The certificate includes a personal certificate, a personal private key, and a certification
authority (CA) root certificate. Each certificate can be uploaded to the server.
z Modify a certificate with caution, because improper modification may cause the
BM635 to improperly operate.
z Do not modify the suffix of a certificate at will.