Huawei Echolife EG8245Q - Indicator Description

8
Indicator Description
Table 1-1 Indicator status description 1
Indicator
Status
Description
CATV
Always on
The CATV function is enabled and CATV signals are
received.
Off
The CATV function is disabled or CATV signals are not
received.
WPS
Steady on
The WPS function is enabled.
Blinking
A Wi-Fi terminal is accessing the system.
Off
The WPS function is disabled.
WLAN
Steady on
The WLAN function is enabled.
Blinking
Data is being transmitted on the WLAN port.
Off
The WLAN function is disabled.
USB
Steady on
The USB port is connected and is working in the host
mode, but no data is transmitted.
Blinks twice a
second
Data is being transmitted on the USB port.
Off
The system is not powered on or the USB port is not
connected.
TEL1–
TEL2
Steady on
The terminal is registered with the softswitch but no service
flows are transmitted.
Blinking Service flows are transmitted.
Off
The terminal is not powered on or fails to be registered to the
softswitch.
LAN1–
LAN4
Steady on The Ethernet connection is in the normal state.
Blinking
Data is being transmitted on the Ethernet port.
Off The Ethernet connection is not set up.
LOS/PON See Table 1-2.
POWER
Steady green
The terminal is powered on.
Off
The power supply is cut off.