Huawei EchoLife HG550

Huawei Technologies Proprietary
36
Table 3-26 Parameters in the CWM Parameters configuration
page
Item Configuration
CRN Auth Type
You can select an authentication type for CRN
(Connection Request Notification) from the
drop-down menu. There are three options including
None, Basic and Digest.
CWM (CPE WAN
Management)
Select Enabled to enable the function of CWM.
Select Disabled to disable the function.
The following are
the Read-Only
Parameters of
CWM
This part display the related information of CWM
including Valid Download, Download Command
Key and Reboot Command Key etc.
II. Save
 Click Apply to save the settings in the RAM.
 To save this configuration changes permanently, enter the
Save & Reboot page, select Save and click Apply to save
new settings.
III. Management Server configuration
Click Management Server configuration to display the
Management Server configuration page.
Table 3-27 shows the parameter explanation of the Management
Server configuration page.