Huawei Technologies Proprietary
39
Table 3-29 Parameters in the QoS Configuration-add page
Item Configuration
Classifier Entry
Properties
Priority: Select a priority number from the
drop-down menu.
Physical Port: Select a physical port from
the drop-down menu.
Application
Source IP: Enter the source IP address.
Destination IP: Enter the destination IP
address.
Subnet Mask: Enter the subnet mask.
Source Port: Enter the range of source port
number.
Destination port: Enter the range of destination
port number.
Protocol: Select a protocol from the drop-down
menu.
TOS / IP
Precedence
TOS: Select a TOS type from the drop-down
menu.
IP Precedence: Select an IP precedence
number from the drop-down menu.
II. Save
Click Apply to save the settings in the RAM.
To save this configuration changes permanently, enter the
Save & Reboot page, select Save and click Apply to save
new settings.
To Next Page
Loading...
