Huawei EchoLife OT925-G User Manual

EchoLife OT925-G
User Guide Tables
Issue 02 (2007-08-30)
Huawei Technologies Proprietary
xlvii
3.5 Configuring the Multicast Service
This section describes how to configure the multicast service, including the multicast VLAN mode
and Internet Group Management Protocol (IGMP) mode.
Context
Multicast refers to the point to multipoint (PTM) communication mode in which the information
source sends information to the certain subset of all network nodes.
The OT925-G provides the video through multicast.
The multicast VLAN ID of the device must be consistent with the OLT configuration. Otherwise, the
multicast service cannot work.
Page
.1 shows the Multicast page.
.1 Multicast page
Procedure
Click Advanced Setting > Multicast in the navigation tree to display the configuration page.
Enter the multicast VLAN ID in the Multicast VLAN ID text box.
Configure the IGMP Capture , the IGMP Mode , the IGMP QuickLeave and the IGMP
Encapsulation .
Click Management > Save/Reboot in the navigation tree, and then click Save/Reboot in the
right pane to reboot the device. The configuration takes effect only after the rebooting.
----End

Huawei EchoLife OT925-G Specifications

General

Brand	Huawei
Model	EchoLife OT925-G
Category	Touch terminals
Language	English