3 Indicator Description
Indicator
Status Description
Power Steady on The ONT is powered on.
Off The power supply is cut off.
PON/LOS See the following table.
LAN1-
LAN2
Steady on The Ethernet connection is in the normal state.
Blinking Data is being transmitted over the Ethernet port.
Off The Ethernet connection is not set up.
TEL Steady on The ONT is registered with the softswitch but no
service flows are transmitted.
Blinks twice a
second
The ONT is registered with the softswitch, and data is
being transmitted on the port.
Blinks once every
2 seconds
The ONT fails to be registered with the softswitch.
Off The POTS port is disabled.
Status
No.
PON Status LOS Status Description
1 Off Off The ONT is prohibited by the upper-layer
device or blinks abnormally. Contact the
service provider for help.
2 Blinks twice a
second
Blinks twice a
second
EG8120L5
Quick Start
3 Indicator Description
Issue 02 (2019-09-10) Copyright © Huawei Technologies Co., Ltd. 5