2
Installing eRRUs on a Pole (60 mm ≤ Pole Diameter ≤ 114 mm)
Installing two RRUs on a pole
b
1. Install the first RRU.
4. Installing the second RRU.
The distance between the bottom of the hoop of the second eRRU and
that of the first eRRU is the height of an eRRU module.
3. Interchange the cover plate in the front and the attachment plate and stainless steel
screws at the rear of the second RRU.
NOTE
To Next Page
Loading...
Need help?
General
