Need help?Do you have a question about the Huawei eSpace IAD104H and is the answer not in the manual?
General| Device Type | Integrated Access Device |
|---|---|
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 0°C to 40°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Network Interface | Ethernet |
| Protocols | SIP, H.248 |
| Voice Codecs | G.711, G.729 |
| Fax | T.38 |
| Storage Temperature | -40°C to 70°C |
| Ports | 4 FXS |
Describes how to access the IAD management system via Telnet, covering HTTPS and HTTP login methods.
Details configuration steps for connecting the IAD104H to NGN/IP PBX using the SIP protocol.
Explains how to configure the IAD104H to connect to NGN/IP PBX using the MGCP protocol.
Provides instructions for connecting the IAD104H directly to the IMS using the SIP protocol.
Guides on configuring a PC to access the network via the IAD104H's LAN and WAN ports.
To Next Page