Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
All values of the MG parameters must be the same as those
configured on MGC.
3. Click OK.
Step 5 Configure the MGC data.
1. Click Next.
The MGCP Service Configuration > MGC page is
displayed.
2. In the MGC1 area, set Config model to IP address mode
and enter the MGC IP address in the MGC IP field.
3. Click OK.
If the DNS server has been configured on the network, set Config
model to DNS and then configure the MGC domain name.
Step 6 (Optional) Set the MGCP software parameters.
1. Click Next.
The MGCP Service Configuration > Soft Parameter
page is displayed.
To Next Page
Loading...
