Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2.
Select Obtain an IP address automatically on the PC
that is connected to the LAN port of the IAD. The IAD
then allocates a LAN IP address to the PC, such as
192.168.100.10.
To access network by the preceding method, ensure that the IAD is
in the NAT (Network Address Translation) mode. Run display nat
in the global configuration mode to check that whether the IAD is in
the NAT mode. If the CLI does not display that NAT is started,
run nat enable to enter the NAT mode.
To Next Page
Loading...
