7
No. Item Description
13 Handset
retaining clip
When the FWT is wall-mounted, it is used to fix the handset.
14 Heaver End the current call or other operations.
Back View
No. Item Description
1 Indoor antenna To receive signals.
2 Hook To fix the FWT when installed vertically.
3 UIM case slot To house the UIM card.
4 Battery case To house the battery.
5 Battery To supply the FWT with power.
6 Battery cord jack To connect to the battery cord.
7 Coiled cord jack on the
main unit
To connect to the handset coiled cord.
8 Coiled cord To connect to the handset to the Main unit.
9 Coiled cord jack on
handset
To connect to the handset coiled cord.
10 Handset To make a call or answer a call by lifting it.
11 Antenna jack To connect to the indoor antenna or the outdoor
antenna.
12 USB jack To the Tx and Rx data connections in the NV
calibration.
To Next Page
Loading...
