80
16 Appendix: How to Repair the Paint
Use the fine sandpaper to polish the paint-peeling spot to remove stains or rust.
Dip the cotton cloth into the anhydrous alcohol, rub the polished spot to remove stains using the cotton cloth wetted by
the anhydrous alcohol, and then wipe the spot using a clean cotton cloth.
• The surface paint must be intact. If there is any peeling paint, repair the paint to protect the base from corrosion.
• The paint coating should be thin and even. Paint drops are prohibited on the coating. The surface should be smooth.
• The color of the re-painted spot should be the same as the original color of the cabinet. There is no visible
chromatic aberration, bulge, or peeling paint.
Anhydrous alcohol
Choose a suitable paintbrush based on the base color.
Shake up the paint before painting. Dip the paintbrush into the paint, and then evenly paint the paint-peeling
spot until the paint-peeling spot is covered properly.
Paint
After the paint is repaired, leave the base under the room temperature for 30 minutes and then perform other
operations.
To Previous Page