2
No. Item
9 Battery indicator
If the FWT sources its power only from the battery (the power adapter is not
connected), the following indicators apply:
Steady blue: The battery is full.
Steady red: The battery is at medium capacity.
Blinking red: The battery is low and must be charged.
If the FWT is connected to the power adapter with the battery inside, the following
indicators apply:
Steady red: The battery is being charged.
Steady blue: The battery is fully charged.
10 Power indicator
Steady blue: The FWT is connected to the power adapter.
11 Working status indicator
Steady blue: The FWT is working.
Rear View
54 32
1
No. Item No. Item
1 Wall-mounting brackets 4 Battery port
2 User Identify Module (UIM) card
slot
5 Battery cover
3 Battery compartment
Installation
Note:
Before installing or removing the battery, indoor antenna, or UIM card, ensure that
the FWT is powered off and disconnected from the power adapter.
To Next Page
Loading...
Need help?
General
