6
Checking the Signal Strength
Power the FWT on and wait until some signal strength indicators turn on or until you hear a
dial tone.
If no signals are received, all the signal strength indicators remain off for more than 5
minutes and you can only hear the re-dial tone.
If signals are weak, all the signal strength indicators remain off even after you have
adjusted the antenna. If you can hear the dial tone coming from a certain direction, position
the antenna towards that direction.
Number of Indicators That Turn On Signal Strength Level Signal Strength
0 0 Weak
1 1 OK
2 2 Strong
To ensure that the FWT can work correctly, the signal strength level must be 1 or 2.
Note:
If the signal strength level is 1 or 2, one or two signal strength indicators remain on
for at least 80 percent of the time that the FWT is working.
Mounting the FWT
Horizontal Mounting
Place the FWT on a smooth surface with cool air and good ventilation. Keep the FWT at least
10 centimeters away from other objects.
Vertical Mounting
Hammer two nails into a wall, reserving approximately 3 millimeters between the nail heads
and the wall surface. Align the FWT's wall-mounting brackets with the nails and secure the
FWT to the wall.
To Next Page
Loading...
Need help?
General
