Huawei HG531s - Page 9

6
When configuring the HG531s V1 for the first time, use an Ethernet cable to connect the
HG531s V1 to a computer.
Installing the HG531s V1 on a 3G network
If you use the 3G data card to access the Internet, you can connect the data card to the USB interface
on the rear panel of the HG531s V1.
Connect your devices in the sequence indicated in the following figure.
1 Telephone wall jack 2 Splitter 3 Telephone
4 Desktop computer 5 Power adapter 6 Set-top Box
7 Laptop computer 8 Smart Phone 9 Pad
a LINE port b MODEM port c PHONE port
MODEM
PHONE
LINE
1
2
3
4
5
6
7
8
9
a
b
c