1441 +92 (51) 111 11 44 44
06
Devices with status ‘online’ will be active at that time. Devices with status ‘oine’ will not be
connected at that time but were active during last 3 days.
5. Conguring WLAN
For setting Wireless settings.
Step 1:
Go to WLAN> click on WLAN basic conguration > set the SSID (Network name). Enable
the SSID by checking the box
Set the Authentication mode to WPA/WPA2 PreSharedKey and Encryption mode to AES.
Set the Wi-Fi security key (Password). It should be 8 to 63 characters
After setting SSID (network name) and password, click on apply button at the end of
setting to apply and save the changes.
To Next Page
Loading...
