1441 +92 (51) 111 11 44 44
08
6.3 Whitelisting
Click on security > Go to Mac Filter conguration > Enable Mac Filter > Select Filter Mode (If
you want to access particular devices then select ‘Whitelist’) > Click on New > Under Device
name option > Write Mac Address of the devices > Click on Apply option.
Note: This step allow only selected devices to have internet access to your Network.
Note: This is only valid for customers with E-view/Optimus packages.
Note: Allowed ports will be 7777, 8888, 8080, 8000.
7. Forward Rules
Under this option, you can directly allow your device to access internet via port forwarding.
On clicking forward rules > Go to port mapping conguration > Click on New > Always select
type: user-dened > WAN name must be Internet > Add IP in Internal Host of particular device
which is supposed to be port forwarded (Note: check IP of device by ‘ipcong’ command in
command prompt) > Keep External Source IP Address to be empty > lastly click on ADD option
and apply.
To Next Page
Loading...
