6
0800 Fibre LTD
If the lights of your ONT
are off, check that it’s
plugged in properly,
powered on, and the rest
of the house has power.
54321
76
Model Type HG8240
!
1. Optical cable.
Do not touch this cable.
It contains fibre optics and is very fragile.
2. This is where you plug your router cable into,
usually the LAN1 port but your Internet Service
Provider will let you know if it’s a different LAN
port number.
3. This is where you plug your home phone into if
instructed by your service provider.
Some service providers will ask you to plug
your home phone into your router instead.
Ask your service provider if you are unsure.
4. Make sure the ON/OFF switch is pushed in.
5. If there are no lights working, check the power plug
is properly connected.
6. BBU function is not currently available.
7. Reset button. Press the button for a short time to
reset the device; press the button for a long time
(longer than 10s) to restore the device to the default
settings and reset the device.
Check your connection
!
!
To Next Page
Loading...
Need help?
General
