Huawei IDEOS X3 - Bluetooth

34
Your mobile phone will automatically read the access point of the SIM card. For
this reason, do not change the parameters of the access point; otherwise, you
might not be able to access network sources.
7.2.2 Turning on the Data Service
1. Touch > Settings .
2. Touch Wireless & networks > Mobile networks .
3. Select the Data enabled check box to turn on the data connection.
7.2.3 Service Shortcuts
1. Open the notification bar.
2. Touch at the top of the screen to switch on or off data services.
You can also touch , , or to switch on or off corresponding
services.
7.3 Wi-Fi
Wi-Fi gives you wireless access to broadband Internet access. To use Wi-Fi on your
mobile phone, you need to have an access to wireless access points (hotspots).
Obstacles that block the Wi-Fi signal will reduce its strength.
7.3.1 Turning On Wi-Fi
1. Touch > Settings .
2. Touch Wireless & networks , and then select the Wi-Fi check box to turn on Wi-Fi.
7.3.2 Connecting to a Wireless Network
1. After turning on Wi-Fi, touch > Settings .
2. Touch Wireless & networks > Wi-Fi settings . You will see a list of detected Wi-Fi
networks in the Wi-Fi networks section.
3. Touch a Wi-Fi network to connect to it.
• If you select an open network, you will be automatically connected to the
network.