
Do you have a question about the Huawei IPC6325-WD-VF and is the answer not in the manual?
| Model | IPC6325-WD-VF |
|---|---|
| Sensor Type | CMOS |
| Effective Pixels | 1920(H) x 1080(V) |
| Max. Resolution | 1920 x 1080 |
| Resolution | 1080p |
| Aperture | F1.4 |
| Video Compression | H.265, H.264, MJPEG |
| Frame Rate | 25/30fps |
| Ingress Protection | IP67 |
| Day/Night | IR cut filter with auto switch |
| Wide Dynamic Range | 120dB |
| Bit Rate | 32 Kbps to 16 Mbps |
| Network Interface | 1 RJ45 10M/100M Ethernet port |
| Type | Security Camera |
| Image Sensor | 1/2.8" progressive scan CMOS |
| Lens | Vari-focal lens |
| Focal Length | 2.8 mm |
| IR Distance | 30 m |
| Power Supply | PoE (802.3af) |
| Operating Temperature | -30°C to 60°C |
| Operating Conditions | Humidity 95% or less (non-condensing) |
| Minimum Illumination | 0 Lux with IR |
| Protocol | TCP/IP, HTTP, DHCP, DNS, RTP, RTSP |
| Dimensions | Φ105 mm |
Location and function of the reset button and SD card slot.
Procedure for installing a Micro SD card into the device.
Step-by-step guide for mounting the camera using the surface-mount method.
Instructions for installing the camera using the indoor ceiling-mount bracket.
Steps for mounting the camera on a wall indoors.
Guidance on connecting power, network, audio, video, and alarm cables.
How to access the device's web interface using a browser.
Configuring essential network settings like IP address and subnet mask.
Configuring parameters for connecting the device to a surveillance platform.
Details on obtaining and configuring the device's IP address.
Configuration for registering the camera via Active SDK.
Settings for GB/T 28181 platform integration.
Common issues and their solutions for the device.
Loading...