6 Installing an Infrared Dome IPC
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Figure 6-17 Fixing the bracket on the wall
Self tapping screws-
Positioning label
Step 7 Connect the video cable to the second video port. Check the video, adjust the lens angle, focus,
and viewing angle in the horizontal and vertical directions, and insert the SD card, as shown
in Figure 6-18.
If the module is found loose after the video adjustment is complete, fasten the screws on the module
again and then install the inner liner and upper cover of the dome IPC.
To Next Page
Loading...