4
After the WPS function is enabled, press and hold this button for more than 2 seconds to initiate WPS
interconnection.
○
10
External antenna port
Connect to an external antenna.
○
11
Power button
Press this button to power the device on or off.
○
12
Power port
Connect to the device's power adapter.
○
13
LAN port
Connect to computers, switches, or other network devices.
○
14
TEL port
Connect to a phone.
○
15
USIM card slot
Accommodate a USIM card.
○
16
Battery compartment
Install the battery.
○
17
Battery port
Insert the battery connection cable.
○
18
Back cover
Note:
On: An indicator is on.
Blinking: An indicator turns on and off at regular intervals.
Off: An indicator is off.
All indicators except the power indicator are blinking: The device is being upgraded or is restarting. To
avoid damage to the device, do not power off during this process.
Getting Started
Installing the USIM Card and the Battery
Install the USIM card and the battery according to the illustration.
To Next Page
Loading...
