Automatically Adjust the Screen Brightness
Go to Settings > Display & brightness, and enable Automatic.
Your device will automatically adjust the screen brightness according to the ambient lighting
conditions.
Manually Adjust the Screen Brightness
You can manually adjust the screen brightness using the following methods:
• Swipe down from the upper right edge of the screen to display Control Panel. In the
section, drag the slider to adjust the screen brightness.
• Go to Settings > Display & brightness. In the section, drag the slider to adjust the
screen brightness.
Adjust the Colour Mode
Go to Settings > Display & brightness > Colour > Colour mode & temperature, and select
the colour mode that you prefer. Normal mode will be easier on your eyes and is therefore
recommended.
• Normal: natural colour tones
• Vivid: vivid colour tones
Adjust the Colour Temperature
Go to Settings > Display & brightness > Colour > Colour mode & temperature, and select
the colour temperature that you prefer. Default and Warm will be easier on your eyes and
are therefore recommended.
• Default: a natural tint
• Warm: a yellowish tint
• Cool: a whitish tint
• You can touch anywhere on the colour circle or drag the spot to adjust the colour
temperature.
Enable or Disable Natural Tone
Natural Tone enables your device to simulate the way human eyes adapt to ambient lighting
to automatically adjust the colour temperature.
When the ambient lighting is of a warm colour temperature, the screen will take on a
yellowish tint; when the ambient lighting is of a cold colour temperature, the screen will take
on a whitish tint.
Go to Settings > Display & brightness > Colour, and enable or disable Natural Tone.
Settings
94
To Next Page
Loading...
