3 USB-C (USB 3.2 Gen 1) port x 2
• With Computer enabled, you can use a USB-C to USB-C cable (which supports
USB 3.2 Gen1, DP1.2, and later protocols) to connect the computer to a monitor.
• With Use as monitor enabled, you can use a USB-C to USB-C cable (which
supports USB 3.2 Gen1, DP1.2, and later protocols) to connect the computer to a
device such as a phone or laptop.
• You can charge connected devices such as phones when the computer is powered
on.
4 Headset port
Connects to a headset.
5 Speaker
The speakers output sound.
6 Microphone x 4
The computer is equipped with four microphones which can better capture sound
or voices when used with audio processing apps.
7 Power button
• When the computer is powered o, press the Power button to power on the
computer.
• When the computer is powered on, press and hold the power button for
approximately 10 seconds to force shutdown the computer.
8 USB-A (USB 3.2 Gen 1) port x 2
• Connects to mobile phones, USB drives, and other external devices to transfer
data.
• You can charge connected devices such as phones when the computer is powered
on.
9 Charging port
Connects the power cable.
Powering On and O the Computer
After the computer is set up, press the Power button until the screen lights up, which
indicates that the computer is powered on.
When using the computer, click > to switch the computer between Sleep mode,
powering o, or restarting.
Force shutdown: Press and hold the Power button for more than 10 seconds. Note that
this will result in the loss of any unsaved data.
Get to know your computer
2
To Next Page
Loading...