Huawei Mobile WiFi User Manual

14
Establishing a WPS Connection
If a Wi-Fi client connected to the Mobile WiFi supports the WPS
function, a network key will be automatically generated
without manual input. To establish a WPS connection,
perform the following steps:
1. Power on the Mobile WiFi.
2. Start the client.
3. Enable the WPS function of the Mobile WiFi.
Note: After Wi-Fi is enabled, press and hold
WPS
to enable the WPS
function of the Mobile WiFi.
4. Enable the WPS function of the client.
Note: For WPS operations on the client, see the user guide of the client.

Huawei Mobile WiFi Specifications

General

4G LTE	Yes
Wi-Fi Standards	802.11b/g/n
Maximum Download Speed	150 Mbps
Maximum Upload Speed	50 Mbps
Battery Capacity	1500 mAh
Maximum Connected Devices	10
Dimensions	96.8 mm x 58.0 mm x 12.8 mm